Century ChenXing Production Workshop Management Training02

Safety is for production, production must be safe. Safety production is the most fundamental guarantee for enterprises and social development.

As an excellent production workshop manager, it should be a safe production advocator and implementer.

Production workshop safety production measures, rules can be summarized as the management and norms of five major elements of "people, machines, materials, sites, laws".

First, "people", ie people's management

Safety management is in the final analysis of people. Personnel demand programs in production workshop should be very standardized.

Employees in the workshop demand, according to the detailed materials of the company's recommendations, first form a preliminary intention of the position, and then go to the auxiliary position for a period of time. In this mill, the workshop is strongly responsible for the most basic evaluation benchmark of the employee, and then based on the operating skill level, proficiency of the employee, forming written information, feedback to the company, to implement the logog.

In response to this position, the workshop will enhance the employee's comprehensive ability to achieve training, re-education, etc. to achieve the purpose of competent. If the employee that is unable to win, thank you for your use.

In daily production, workshop managers should pay attention to communicating with employees, increase their work confidence and passion through excitation methods such as praise, encouragement, reward.

Second, "Machine", that is, the management of machine equipment

Machine equipment is the material conditions for the production activities of the company, and is the primary guarantee for safe production.

As a production workshop manager, according to the complexity of equipment maintenance, to customize "equipment responsibility card" for each device, and implement the person responsibility. The company does not regularly carry out on-site management checks, and establishes a matching award and punishment system, enabling each equipment responsible person to form a good habit of conscious maintenance equipment.

When the employee is handover, there must be a transfer record of the operation of the machine equipment. Once the machinery is discovered, it can be reported in time, timely maintenance.

In addition, the machinery equipment operation training or theoretical training should be scheduled to meet the purpose of safe operation.

Third, "material", the management of materials

Material management is the basic factor in safe production. The workshop starts to start with specialized personnel, and special training should be made to familiarize themselves with the process of process, and the chemical properties of each material are wellformed, and the material required for one day can be calculated. For materials that are not stored, it is strictly forbidden to stay in the workshop and do it.

Personnel must check the warehouse raw material, which is strictly prohibited to bring unqualified raw materials to the workshop. To this end, the workshop should also establish a special assessment system, cultivate employee, careful work style.

Fourth, "environment", the environment management

The environment can directly affect safe production and the premise of creating quality products. As a production workshop manager, it should be combined with the 5S management idea of ​​"finishing, rectifying, cleaning, cleaning, literacy", and management as the starting point, through self-examination and mutual investigation, combined with the actual rules of the workshop. The various supplies and tools of the workshop should be standardized and become a habit.

The production workshop manager should encourage employees to actively participate in the "rationalization recommendations" activities, discover, explore the effective recommendations for improving on-site management, and analyze, improve, put into implementation, to achieve continuous improvement purposes.

V. "Act", that is, the operation method, instruction

The operation method is the route of the boot operation, the route cannot be changed during the operation. Some operators, especially new employees, often have doubtful operations, as a management workshop manager, in addition to explanation, you should also send experienced old operators to teach hands, until they fully understand and master.

In order to reduce safety hazards, the workshop should also be checked according to the original record, display recorder, and non-regularly, remind the operator to be vigilant, and the operation is exactly the same. In response to each of the different positions, the workshop should also formulate the tailings of the functional assessment of the positions, a week, a big review in January, the award-proof is carried out according to the regulations specified in the assessment rules, and further improve the level of operation in the operating process. .

In short, as a production workshop manager, be sure to recognize: safe production is not a phased work, but a long-term continuing project. Safety production management should also pay attention to the following four aspects:

First, safety management people must be unswerving

First of all, management should update the concept, break the conservative thinking of the ink, not thinking about it; secondly, it is necessary to work hard to work on the employee, kill the employees of employees, go to customs clearance, and all according to standards. Be good at studying the dynamics of employee workers, eliminating hidden dangers before the post, the job; then, it is necessary to improve the way of work, pay attention to the work of flexible and diverse, do not die, pay attention to the feelings of emotion, create a harmonious team atmosphere .

Second, safety management must pay attention to the control of the operation process

First, to establish management assessment mechanisms, managers should strengthen the inspection and supervision of the on-site operation process, truly discover and handle security hazards during the dynamic process, eliminate formalism; second, the grassroots department assessment check, do the results and process phase In combination, based on the actual investigation and research of on-site actual investigation, the results are carried out to eliminate the film. Be
Be

Third, safety management must achieve self-management transformation from external management to class

First of all, we must establish a team assessment mechanism to establish a step-by-step assessment framework for workshop assessment groups, team assessment groups, and team assessment posts, responsibility, rights, and profit groups, to turn responsibilities and power into pressure and power to mobilize each employee. Positive, consciously actively participate in safety management, realize self-control, mutual control, and he control in safety management. Implement the self-management of the team can truly build the first line of defense from the basis.

Fourth, safety management should be pre-pre-prevention, forward movement, and do a good job

After the production workshop management training, the company's management summary for this training: First, we must take the initiative to attack, save the pressure, and dare to reveal. For the existence of highlighted safety hazards, we must seize typical, expand education analysis, and cause the responsible person to vibrate, so that employees have been educated. The second is to focus on establishing precautions, highlighting the main policy, and quickly formulating preventive measures, decisiveness to correct, and find key people in work, key positions, and focus on control, The purpose of achieving preventive problems.